This clever pump actually has two air compressors (pumps). The low pressure pump will shift a large volume of air and the high pressure pump will shift less air, but at a higher pressure.

This will save an enormous amount of time if you were pumping up, say, a large air mattress with a conventional pump. The pump will inflate with large volume air and will switch over to high pressure air as it reaches the end of the inflation cycle. It can also be set to pump at a nominated pressure by the LCD panel. This is particularly handy for inflating rigid inflatable boats. Not only that, it can be used to rapidly remove air from devices that needs to be deflated. 

The pump is self-contained with a permanently connected 12V power lead with cis generous 5 metres long. Supplied with 3 separate air nozzles, 1.4m flexible air hose, instructions, and lined and zippered nylon carry bag. 

• Lower pressure pump: Up to 280lpm at 0.65PSI

• High Pressure pump: Up to 40lpm at 8PSI

• Power: 12VDC at 110W

• Noise: <85dB

• Dimensions: 215(L) x 175(W) x 110(H)mm